industry and machinery 

products

SyntLub ® K

Synthetic lubricant for the maintenance of chains and wire ropes.

SyntLub K is a synthetic lubricant that forms a transparent protective film and is effective in a temperature range from -45°C to +160°C.
It contains no organic fats, petrol derivatives or additions of silicone, molybdenum sulphide and Teflon. Thanks to its excellent capillary effect, it penetrates into the pores of the metal surface and forms a non-measurable separation film. it contains an effective anti-corrosion protection and a high-pressure additive, and separates hardened oil and grease residues.
Performance Features
SyntLub K – loosens resins and rust and has a cleaning effect
– prevents the formation of rust
– forms an outer skin on wire ropes
– has good penetration properties, penetrating into microscopically small pores and gaps
– infiltrates water and forms a protective film against moisture
– has a high creep capability and is especially suited for small chains
– economical in use.
SyntLub K eignet sich zur Schmierung aller Art von Ketten und Seilen, sowie alle beweglichen Teile, Gelenke, Bolzen, etc. Bei hohen Vibrationen und Stossbelastungen; überall dort, wo ein transparenter Film gewünscht wird.
Technical data
liquid   
Application temperature -40 to +160°C
easy biodegradability
low temperature

Gear-RackLub

Lubricant for open gears and crown gears.

Gear-RackLub is a combination of chemically treated solid lubricants and a solvent-free, synthetic carrier agent. It reduces the roll and slide friction between the gear wheels that occurs under extreme pressure loading and considerably reduces their wear.
Performance Features
Gear-RackLub forms an extremely strong and dry adhering lubrication film on metal surfaces. This film also remains resistant over a long period, even under extreme pressure and heat loading and thereby guarantees constant lubrication.
Gear-RackLub
– reduces the wear to an extraordinary extent
– prevents the icing that could impair the function during the wintertime thanks to its long-term separation and lubrication film
– forms no dust and is also not thrown off at high speeds.
Gear – RackLub can be applied to -20°C.
The resistance of the lubricating film is guaranteed with a constant function from -90°C to +550°C.
Savings can be realised through a suitable lubrication system.
Technical data
NLGI          00     
Solid lubricant content  >20%
Application temperature -20 to +120°C
carrier liquid 95% degradable
high temperatur

GearLub

Wheel flange fluid grease for crane tracks and wheels.

GearLub reduces the roll and slide friction between the wheels and the track that occurs under extreme pressure loadings. The wear is significantly reduced.
Performance Features
GearLub bildet schon bei geringer Dosierung einen nicht lösbaren und auf Metalloberflächen äusserst stark und trocken haftenden Schmierfilm. Dieser ist auch bei extremer Druck- und Wärmebelastung über einen langen Zeitraum beständig und garantiert somit eine konstante Schmierung. GearLub ermöglicht mit der besonders auserwählten Festschmierstoff-Zusammensetzung eine Übertragung eines dünnen Schmier- und Trennfilmes zwischen den Reibpartien. GearLub enthält keine Lösungsmittel und kann bis -20°C appliziert werden.
Die Beständigkeit des Schmierfilms ist bei gleichbleibender Funktion von -90°C bis +550°C garantiert.
Technical data
NLGI          00      
Solid lubricant content  >15%
Application temperature -20 to +100°C
low temperature
high temperatur

PasteLub ® 10/12

Fitting and release paste.

PasteLub 10/12 is an antiseizure and lubrication agent in a metallic basis developed according to the latest finding in tribology, which operates at temperatures from -180° to +1300°.
An antioxidation additive with wear-reducing and corrosion protective inhibitors provides an excellent long-term protection against seizure and corrosion.
For Screw connections of all kinds, static and moving construction elements, steel and machine industry, jointed connections on building machines, lubrication of open gears and spindles, operational maintenance in the chemical industry, seals as a release agent, manhole covers, lubrication of bolts and bushes in brake linkages in the area of motor and rail vehicles as well as agricultural machinery.
Performance Features
Even after many years of exposure to high temperatures and loads and aggressive environmental factors, it is possible to dismantle the treated parts.
– Resistant to moisture
– sprayed water and salt water
– protects against corrosion
– water repellent
– resistant to pressure
– reduces noise
– does not form gummy deposits
– reduces wear
– adhesive
Long-term lubrication increases sealing effectiveness, prevents burning together, seizures and welding.
Technical data
NLGI          2-3      
Solid lubricant content  >30%
Application temperature -30 to +180°C
easy biodegradability
low temperature
high temperatur

PasteLub ® R

Strongly adhesive special lubricant for Buffer.

PasteLub R consists of synthetic esters, polymers, solid lubricants and additives. It considerably reduces the friction losses and the material wear that arise during extreme pressure loading. Excellent long-term protection against seizure and corrosion. It is also very suitable for buffers and rolling mill pins.
PasteLub R is free of lead, chlorine, sulphur, phosphor, mineral oil and rape seed oil! Its solid lubricant proportion is 25%.
Performance Features
Even when applied thinly, PasteLub R forms a non-soluble lubrication film that adheres extremely strongly to buffer plates and is easily transferred. Economical in use. The film also does not wash off in washing stations. Even under extreme pressure and heat loading, PasteLub R remains stable over a long time period, and thereby guarantees constant lubrication.
PasteLub R remains functional from -70°C to +1200°C.

Technical data
NLGI          0/00      
Solid lubricant content  >25%
Application temperature -30 to +80°C
low temperature
high temperatur

SyntLub ® 2062

Synthetic high-tech lubricant for chains & escalators.

SyntLub 2062 was developed for the lubrication of the small parts of chains, such as rollers, pins, bushes and side plates. The product penetrates deep into the smallest separations and has an excellent effect in the prevention of wear. The anti-corrosion protection prevents the formation of rust. It is also recommended for use with drive chains, conveyor chains and rollers.
Performance Features
SyntLub 2062 is a synthetic high-tech lubricant with an effective anticorrosion protection and excellent lubrication properties.
– Stable under pressure and resistant to temperature
– outstanding penetration and lubrication properties
– outstanding surface wetting
– large penetration capability
– reduces wear
– easy to clean, does not form gummy deposits or a crust
– repels water and forms a protective film.
Technical data
liquid      
Application temperature -30 to +140°C
low temperature

SyntLub ® 2031

Synthetic high-tech lubricant for chains & escalators.

SyntLub 2031 is a synthetic lubricant that forms a transparent lubrication film, that has an excellent capillary effect and thereby penetrates with ease into the parts of the chain.
SyntLub 2031 can be used in chain lubrication units without any problems, and, as a minimal lubrication, replaces conventional lubricants such as oils, that were previously used for large scale lubrication.
Performance Features
SyntLub 2031 contains an effective anti-corrosion agent and a high-pressure additive. It does not attack synthetic materials such as Vulcolan or rubber, and does not cause them to swell. Other materials that are associated with the operation of escalators are also not attacked (including cables).
SyntLub 2031 is clean, water repellent, anti-static and wear reducing, and can be used in the temperature range from -30°C to +230°C.
SyntLub 2031 is suitable for the chain lubrication for escalators in indoor and outdoor facilities at airports, underground railway stations, and department stores.
It is suitable for the lubrication of all moving parts, such as joints and bolts.
Technical data
liquid      
Application temperature -30 to +230°C
carrier liquid 85% degradable
low temperature

HT PU 680

Water-resistant high temperature lubricating grease.

HT PU 680 680 is a high temperature lubrication grease with synergistic action of EP additives.
It has an excellent pressure absorption capability and has a very good resistance tom water. Additional properties are:
– Strong adhesion capability
– good protection against corrosion
– high oxidation stability
– good resistance to aging
– high pressure resistance <350 bar
– good sealing effect
– resistant to aggressive media.
Performance Features
HT PU 680 is used in iron and steel rolling mills for the high temperature lubrication via central systems for
– Roller bearings in continuous casting plants (slab and billet, calibration section roller bearings)
– Transport facilities in continuous furnaces
– Annealing furnaces and foundry stoves
– hot roller lines in cardboard factories
– tar machines in road building
– special application with the railway in the lubrication of spring bolts and as a protection against corrosion.
Technical data
NLGI          1      
Application temperature -20 to +200°C

Hydrosynt HEES

Biodegradable hydraulic oil.

For virtually all hydraulic systems, elastomer compatibility, especially with required environmental, hydraulic, fresh water production, dredging, water boats, locks, food processing, cold storage facilities, forestry, etc. For hydraulic systems of machinery, vehicles, machine tools, presses and other equipment.
Performance Features
Synthetic, mineral oil-free, biodegradable and extremely shear-stable multigrade hydraulic oils. HYDROSYNT has a very favorable viscosity-temperature behavior (very high VI), is equally resistant to high temperatures as cold-stable and has excellent oxidation, stability and excellent corrosion protection – elastomer compatibility. It does not paint seals and machines, has no tendency to foam formation. Has a very good wear protection.
Hydrosynt HEES is a special type, and can serve as NWG (not water-hazardous) are.
Technical data
liquid     
Pourpoint  -45°C
carrier liquid 95% degradable

CeramLub ® 35 purple

High-temperature ceramic paste for brake systems.
Fitting and release paste.

CeramLub 35 purple contains more than 30% of solid lubricants on a ceramic basis, which prevent tribo-corrosion and produce an excellent release effect up to +1600°C.
CeramLub 35 purple is used as an antiseizure paste for all standard metallic materials because it contains no electrochemically active metals.
For the tightening and lubrication of cylinders, gear wheels, shafts, bolts, springs, Bowden cables, brake and steering rods, brake cylinders, jaws, calipers, threaded spark plugs, screw exhaust fittings, set screws, wheel bolts etc.
Performance Features
CeramLub 35 purple is
– resistant to salt water, acids and alkalis
– water repellent, protects against corrosion, does not harden
– against frictional corrosion
– prevents seizing and bonding
– high pressure loading, is non-adhesive and guarantees long-term lubrication
– temperature resistant from -20 °C to +1600 °C
– noise reduction during braking
– elastomers, rubber and plastic are not stressed
– effective during the complete service life of the brake pads and disks.
CeramLub 35 purple, the high temperature ceramic paste can be easily machined. It forms an effective corrosion protection film on steels that are vulnerable to rust.
The paste contains no electrically conducting components that could lead to short-circuits in the electrical connections of ABS sensors or in wear detectors.
Technical data
NLGI          2      
Solid lubricant content  >30%
Application temperature -30 to +80°C
high temperatur

BSS ® Brake Service Spray

High performance metal-based release agent.
400 & 50 ml Spray for car, truck, motorcycle und bike.

The solid lubricant fractions are pressed into the pores of the metal surface by the mechanical movement of the brake components. This fills out any depressions and thereby enlarges the braking surface. The resulting coating offers excellent protection against the penetration of water, dirt and salt.
Properties:
– prevents brake squeal without the braking effect change
– temperature resistant from -30°C to +1300°C
– dissipates heat
– prevents the seizure of the brake shoes or pads
– prevents uneven wear of the brakes
– extends the lifetime of the brake shoes or pads
– reduces the formation of brake dust
– prevents blocking of the brake jaws
– increases braking security
– facilitates dismantling.

CeramLub ® 2kdd

High temperature ceramic paste for brake systems. Fitting and release paste.
200 ml two-chamber pressure can with brush adapter.

CeramLub ® used worldwide for the treatment of brakes during installation and service. It contains more than 30% solid lubricant on a ceramic basis. This prevents tribocorrosion and produces an outstanding separation effect up to 1’600°C.
Properties:
– temperature resistant from -20°C to + 1600 °C
– resistant to salt water, acids and alkalis
– water repellent, protects against corrosion and does not become gummy
– resists fretting corrosion
– prevents seizure and bonding
– high pressure absorption, is adherent, and guarantees long-term lubrication
– reduces noise
– noise abatement during braking
– elastomers, rubber and plastic will not be stressed
– effective during the entire service life of brake shoes and disks.
Close Menu